...
Apply to all edges: If apply to all edges option is marked, purlins will be created on all roof surfaces according to the entered parameters.
Fascia
...
To draw an fascia board:
Click the Fascia Board icon in the ribbon menu .
Click with the left mouse button on the roof eaves on which you want to create an fascia board.
The eaves rim fascia dialog will be displayed. Make the necessary settings here and press the OK button.
There will be fascia board on the relevant roof surface.
Create the fascia board for all roof surfaces with the above process order.
The same parameters are included in the fascia board dialog as in the purlin dialog.
...
Distance: If a double collar beam is drawn, the distance between the two tensioners collar beam is entered.
Trim distance: It determines where to trim the collar beam ends diagonally. Negative or positive value can be entered.
...