...
Reinforcement shearwall Beam Anchors
...
In this tab, the shearwall and connection reinforcement settings of the beams above and below the Reinforcement shearwall are made.
Specifications | DescriptionReleases |
|---|---|
Steel diameterRebar Diameter | Reinforcement range values are entered for the relevant connection. Reinforcement Range |
Steel interval | Reinforcement range values are entered for the relevant connection. |
Anchorage lengthAnchor Length | It becomes active if the "Defined Reinforcement LengthsManual steel lengths" option is selected and the anchor length can be entered as user-defined. |
ExtensionLengthlength | It becomes active if the "Defined Reinforcement LengthsManual steel lengths" option is selected and the anchor length can be entered as user-defined. |
Drill and latch top anchor reinforcementsCreate top bars hole through | If it is marked, it arranges the top anchorage reinforcements in the reinforcement walls as piercing reinforcement to a top wall. The lower zone anchor reinforcement settings will be the same as the upper zone anchor reinforcement settings. It does not need to be intervened. |
...
The regions and reinforcement positions of the anchors are shown below according to the colors given:
...
Specifications | Releases |
|---|---|
Rebar Diameter | Reinforcement range values are entered for the relevant connection. |
Reinforcement Range | Reinforcement range values are entered for the relevant connection. |
Anchor Length | It becomes active if the "Defined Reinforcement Lengths" option is selected and the anchor length can be entered as user-defined. |
Extension Length | It becomes active if the "Defined Reinforcement Lengths" option is selected and the anchor length can be entered as user-defined. |
Punch reinforcement | If marked, it arranges the column anchorage reinforcements in the reinforcement walls as punch reinforcement to the next elements. |
...
The regions and reinforcement positions of the anchors are shown below according to the colors given:
...
Specifications | Releases |
|---|---|
Rebar Diameter | Reinforcement range values are entered for the relevant connection. |
Reinforcement Range | Reinforcement range values are entered for the relevant connection. |
Anchor Length | It becomes active if the "Defined Reinforcement Lengths" option is selected and the anchor length can be entered as user-defined. |
Extension Length | It becomes active if the "Defined Reinforcement Lengths" option is selected and the anchor length can be entered as user-defined. |
Punch reinforcement | If marked, it arranges the column anchorage reinforcements in the reinforcement walls as punch reinforcement to the next elements. |
...