...
Specifications | Description |
|---|---|
Steel diameter | Steel diameter values are entered for the relevant connection. |
Steel interval | Steel interval values are entered for the relevant connection. |
Anchorage length | It becomes active if the "Manual steel lengths" option is selected and the anchorage length can be entered as user-defined. |
Extension length | It becomes active if the "Manual steel lengths" option is selected and the anchorage length can be entered as user-defined. |
Hole through bars | If marked, it arranges the column anchorage reinforcements in the reinforcement walls as hole anchorage to the next elements. |
...
Reinforcement Jacket Anchorages Tab
...
In this tab, the settings of the sheathing anchorage reinforcements reinforcement jacket anchorages of the mantle made column elements located on the right and left of the Reinforcement reinforcement shearwall are made.
The regions and reinforcement positions of the anchors anchorages are shown below according to the colors given:
...
Specifications | Releases | Rebar DiameterDescription |
|---|---|---|
Steel diameter | Reinforcement range values are entered for the relevant connection. | Reinforcement Range |
Reinforcement range Steel distances | Steel distance values are entered for the relevant connection. | |
anchorage Length | It becomes active if the "Defined Reinforcement Lengths" option is selected and the anchorage length can be entered as user-defined. | |
Extension LengthAnchorage length | It becomes active if the "Defined Reinforcement LengthsManual steel lengths" option is selected and the anchorage length can be entered as user-defined. | |
Hole anchoragethrough bars | If marked, it arranges the column anchorage reinforcements in the reinforcement walls as hole anchorage to the next elements. |
...
Punching
...
Reinforcements Tab
...
Specifications | ReleasesDescription |
|---|---|
Punching reinforcement type  | Punching reinforcement types described in Article 7.11.11 and Article 7.11.12 of TBDY 2018 can be selected from the list for the vertical bearing element being treated. If stapling reinforcement will not be used, "Without stapling equipmentNo punching reinforcement" type can be selected. You can edit the values given in the dialog according to the type selected. |
See Also: Zımbalama Kontrolü
...
Components Tab
...
Add Building Components: Assigns the projected building materials to the object for detailed building components metrics.
...
The parameters available in the component selection dialog are:Use
In the usage section
No changemodification: The amount of material to be assigned for the object in question is marked when it is desired to be used in the size that was previously specified in the material definition.
Percentage ratio: This line is marked when it is desired to be used with the percentage of the amount previously determined in the material definition, as much as the value entered in the "Value 1" line in the same dialog. For example, if the material quantity is 70, if the line “Value 1” says 40, it means the material amount will be used up to 40 * 70%.
New definedOverride: This line is marked so that the quantity entered in the “Value 1” line in the same dialog will be used instead of the quantity previously determined in the material definition.
Multiplier: This line is marked in order to use the value found at the end of the multiplication of the value entered in the "Value 1" line in the same dialog with the amount previously determined in the material definition.
FractionalFraction: This line is marked so that the amount determined in the material definition before will be used as the fraction value created by the values entered in the "Value 1" and "Value 2" lines in the same dialog. "Value 1" is the denominator "Value 2" is the denominator.
ProportionProportional to: It is determined to what scale-area, circumference, length etc.-, region-side area, top, edge etc.- the material will be proportioned to. The content of the proportional list box is automatically determined according to the object and the size of the material. For example, a different list will be created if an operation is made for the column, a different list will be created for the library, a different list for the volume, and a different list for the field.
...
Loses | ||
Measure | Listed | Explanation |
Constant | Independent | The fixed measure used will be used exactly as the amount. |
Length | Independent | It means that the length measure found while defining the material will be used exactly as the length value. |
Front length | It means that the length of the material will be found by multiplying the length of the material found while defining the material and the length of the front side according to the shearwall viewing direction. | |
Back length | It means that the length of the material will be found by multiplying the length of the back side according to the viewing direction of the shearwall with the length measure found while defining the material. | |
Average length | It means that the length of the material will be found by multiplying the length measurement found when defining the material and the average length value found from the length of the front and back sides of the shearwall. | |
Average height | It means that the length of the material will be found by multiplying the length value found by taking the average of the height of the left and right ends of the shearwall with the length measure found while defining the material. | |
Thickness | It means that the length of the material will be found by multiplying the length measure found when defining the material and the thickness of the shearwall. | |
DomainArea | Independent | It means that the area measure found while defining the material will be used exactly as the amount. |
Front area | The value to be found by multiplying the area measure found while defining the material and the area of the surface on the front according to the viewing direction of the shearwall will be used as the material area. | |
Back area | It means that the value to be found by multiplying the area measure found while defining the material with the area of the surface on the back side according to the viewing direction of the shearwall will be used as the material area. | |
Front and back area | The value found by multiplying the area measure found while defining the material and the sum of the front and back areas of the shearwall will be used as the material area. | |
Starting Start area | The value to be found by multiplying the area measure found while defining the material and the area of the surface on the left according to the viewing direction of the shearwall will be used as the material area. | |
End area | The value to be found by multiplying the area measure found when defining the material and the area of the surface on the right according to the viewing direction of the shearwall will be used as the material area. | |
Start and end area | The value found by multiplying the area measure found when defining the material and the sum of the left and right surface areas of the shearwall will be used as the material area. | |
Upper Top area | The value to be found by multiplying the area measure found when defining the material with the area of the surface remaining on the shearwall means to be used as the material area. | |
SubfieldBottom | The value to be found by multiplying the area size found when defining the material and the area of the surface under the shearwall means to be used as the material area. | |
Upper Top and lower bottom area | It means that the value found by multiplying the area measure found when defining the material and the sum of the surface areas on the upper and lower sides of the shearwall will be used as the material area. | |
Side area | The total value found by multiplying each of the surfaces on the sides of the shearwall with the area measure found when defining the material means to be used as the material area. | |
Volume | Independent | It means that the volume measurement found when defining the material will be used exactly as the volume value. |
Volume | It means that the volume measure found when defining the material will be used by multiplying the shearwall volume. | |
NumberCount | Independent | The number count measure found while defining the material will be used exactly as the material numbercount. |
NumberCount | The number count measure found when defining the material, as the number count of materials It means it will be used exactly. | |