...
Specifications | Description |
|---|---|
Elevation | Enter the height (elevation) of the pool from the ground. Zero floor floor and pool floor coincide. |
Color | Enter the color of the pool lines. You can choose the color you want from the dialog that opens when the button is clicked. |
Invisible wall line type | Determine the line type of the wall lines remaining in the background in the pool from the list. |
Water material | For the solid model, select the material (texture) of the water from the drop-down list. |
Texture world length | Texture length is entered. For example; If 1 is entered, the width of the selected material texture will be taken as 1 unit and will be covered on the selected object. If the texture is considered to be in the form of a square, the object surfaces are covered with 1x1 textures aligned side by side. |
Structural Tab
...
Specifications | Description |
|---|---|
Structural material | Select the structural material to be used in the pool calculation from the list. Structural material can be defined as a reinforced concrete element under Materials in Building Tree. |
Water unit weight | Unit weight of water is entered. The default value of the program is equal to 1 t / m 3 and normally you do not need to change it. |
Soil unit weight | Give the soil unit weight of the floorr on which the pool sits. |
Bedding coefficient | Give the bedding coefficient of the floor on which the pool sits. |
Finite element width | Enter the maximum finite element width to be taken as basis in shell calculation. The program analyzes shells by dividing them into trapezoidal form finite elements. Finite element width is automatically adjusted according to the shell shape, provided that it does not exceed the value entered in this row. |
Surface Tab
...
Specifications | ExplainedDescription |
|---|---|
Pool floor Slab thickness  | Give the thickness of the pool floor tileslab. |
Depth  | Give the measured height of the water surface above the floor of the pool. |
Depth difference  | Havuz Yüzeyi Eğimi DüzenleCheck outHavuz Yüzeyi Eğimi Düzenle andHavuz Yüzey Özelliklerini Ayarla . |
Surface angle  | Havuz Yüzeyi Eğimi DüzenleCheck outHavuz Yüzeyi Eğimi Düzenle andHavuz Yüzey Özelliklerini Ayarla . |
Inclination Slope angle in plan  | Havuz Yüzeyi Eğimi DüzenleCheck outHavuz Yüzeyi Eğimi Düzenle andHavuz Yüzey Özelliklerini Ayarla . |
Waterlevelelevation  | Indicate the level of water that will fill in the pool. |
Flooring Slab material  | Select the view of the pool floor to be displayed in the solid model from the list. |
Actual tissue Texture world length  | Tissue Texture length is entered. For example; If 1 is entered, the width of the selected material texture will be taken as 1 unit and will be covered on the selected object. If the texture is considered to be in the form of a square, the object surfaces are covered with 1x1 textures aligned side by side. |
Water may appearVisibility  | Check if you want water to be visible on the solid model. Otherwise, do not mark it. |
Moment calculation angle  | In automatic selection, it is the preferred option in most cases. However, in special systems, give the account angle at the desired value. |
Wall Tab
...
Specifications | ExplainedDescription |
|---|---|
Wall thickness | Give the thickness of the pool wall whose properties have been changed. |
Top jeans | Give the upper elevation of the pool wall. The height of the pool walls is equal to the pool height. The height of the pool wall will change according to the value entered in the upper elevation value. + or - can be given a value. |
Upper left jeans | With the value entered here, it changes the height of the upper left corner of the pool wall. Give a suitable value according to your system. For example, if you give the upper left elevation of a 200 cm high wall as 25, you would define a wall with a constant slope from 200 to 225. To change the bottom slope of the pool, you can use the command "edit pool surface slope". |
Top right jeans | With the value entered here, it changes the height of the upper right corner of the pool wall. Give a suitable value according to your system. For example, if you give the upper right level of a 200 cm high wall 25, you would define a wall with a constant slope with a base going from 200 to 225. To change the bottom slope of the pool, you can use the command "edit pool surface slope". |
Side surface | For the solid model, select the material (texture) of the side surfaces of the pool wall from the drop-down list. |
Lower - upper surface | For the solid model, select the materials (textures) of the top and bottom surfaces of the pool wall from the drop-down list. |
Actual tissue length | Tissue length is entered. For example; If 1 is entered, the width of the selected material texture will be taken as 1 unit and will be covered on the selected object. If the texture is considered to be in the form of a square, the object surfaces are covered with 1x1 textures aligned side by side. |
Ground level | It is the elevation that determines the height of the soil on the side where the pool wall touches the ground. |
spleen | Give the pool wall off the plan. The position of the wall in the plan will change according to the value entered in the top, middle bottom and any definition. |
...
Specifications | Explained |
|---|---|
Width | It is the width value of the pool console slab. |
Thickness | It is the thickness of the pool console slab. |
Materiel | For the solid model, select the material (texture) of the side surfaces of the pool wall from the drop-down list. |
Actual tissue length | Tissue length is entered. For example; If 1 is entered, the width of the selected material texture will be taken as 1 unit and will be covered on the selected object. If the texture is considered to be in the form of a square, the object surfaces are covered with 1x1 textures aligned side by side. |
Live load | It is the live load value to be taken into account in the pool console flooring. |
...