You can edit the profiles for the top, bottom cap and posts header, footer, vertical and diagonal of the scissors truss in the Section tab of the Scissors Truss Settings dialog.
Click the Scissors Truss icon in the ribbon menu .
...
The scissorstrusses toolbar will open. Here Settings , click the icon.
...
The Scissors Truss Settings dialog will be displayed. Here click the Section Click the tab.
...
You can choose the sections of your scissors truss for the upper and lower head, strut and crossheader, footer, vertical and diagonal. Select the section you want to use from the Sections List.
...
Click the button of the element to which you want to assign the section you selected in the Assign sectionto. For example, when you click the top title header button, the section you select will be assigned to that heading.
...
If you want, you can click All to assign sections to all the elements of your scissors yourtruss at once. You can see the preview of the section on the right side of the element you have assigned.
...
You can choose from top, center of gravity and bottom options for the placement of the scissors truss elements. You can give offset delta X and Y values by selecting the Defined option.
...
...
Specifications | Explained | Specifications | ExplainedDescription |
|---|---|---|---|
Sections  | All sections with the project added are listed. The desired cross wanted truss section is selected from the list and assigned to the truss elements. A section not included in the list is added to the list by using the load section button. | ||
Section settings   | The truss elements of the section selected from the list from the ancestor profile section are assigned from this section. The selected section can be assigned to all scissor truss elements by clicking the All button, and only the section can be assigned to that element by clicking one of the Upper Headingheader, Lower Headingfooter, Post vertical and Cross diagonal buttons. | ||
  | The Load Section button is used to add new sections to the sections in the section list . | ||
 
| In case of using non-symmetrical profiles, this option is marked if the strut at the start and end of the scissors is desired to have different directions.  |
...