...
Click the Cross Joint Combination-9 line from the Steel menu.
From the 3D perspective view, click the converging crosses in turn.
The combination will occur with default settings.
Double-click the combination to change settings.
The unification dialog will open.
...
| Table of Contents |
|---|
...
Main
...
Plate Tab
Arrange the sheet dimensions according to the schematic representation found in the dialog.
...
...
Brace Connection Tab
Select one of the combination connection types from the list in the Type section. Additional features will appear in the dialog according to the selection. Arrange the sheet dimensions according to the schematic representation found in the dialog.
...
...
Brace types:
...
Bolts Tab
It becomes active when bolted support type is selected in the Type section. In this tab, the properties of the bolts to be used are set. Arrange the bolt spacing and number according to the schematic representation given.
...
Bolt properties: Bolt class, bolt diameter and hole properties are set in bolt properties.
...
Welds Tab
The source weld properties of the joints connections given in the schematic representation are set in the Resources Welds tab. Give the thickness, type, angle values and mark the option whether to weld under construction site conditions.
...
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
...
Design
...
Data Tab
In the design inputsdata, the plate material and the strength of the welding electrodes are is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...
If necessary, click the list and define "new plate materialCreate New…". To create the welding electrode, give the information "Name" and "Strength" in the dialog that opens after clicking "Create New".