Page Comparison

Construction types

One of the straight, folded, lemon beam and ramp type ladder systems is selected by clicking with the left mouse button.

Step parameters

D1 is the tread lining nose length, D2 is the pier lining thickness, D3 is the rung lining thickness. If coating is not desired, these values ​​are entered as zero.

Lemon beam parameters

LK1 and LK2 determine the lemon beam height. It is shown on the figure. The thickness parameter is the lemon beam thickness.

Ladder name

The name of the ladder is entered.

Stair elevation

The lower point of the stairs is the elevation measured from the floor floor.

Number of railing surfaces

The number of railing surfaces determines the number of railing vertical surfaces (railing section). If the number of railing surfaces is 4, the parapet cross section becomes square.

After printing No. write

The digits after the digit number entered here are not numbered on the ladder.

Draw the section line

If it is desired to draw a section line on the ladder, it is marked.

Static material

Select the static material to be used in the stair element from the list.

Finite element width

Enter the maximum finite element width to be taken as basis in shell calculation. The program analyzes shells by dividing them into trapezoidal form finite elements. Finite element width is automatically adjusted according to the shell shape, provided that it does not exceed the value entered in this row.

Show reinforced concrete calculation axes

If it is desired to show reinforced concrete calculation axes, it is marked.

Schematic drawing

Which elements of the staircase are defined by line types and colors are shown in schematic drawings and numbering.

Line types

A separate line type is selected for the lines forming the ladder in the plan. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button. The lines are numbered in red on the figure on the left.

Colors

A separate color is chosen for the lines forming the ladder in the plan. The lines are numbered in blue on the figure to the left of the dialog. When the color box is clicked, the appropriate color is selected from the window that opens.

Label

By marking the label, the number of berths, rung height and width are shown on the ladder.

The font of the label font and the number of risers, the height and width of the digit is selected.

The text color of the label color and the number of risers, the height and width of the digit is selected.

The number of risers, the height of the digit and the height of the text of the width text are entered on the label height.

The total number of digits is unmarked, and the number of berths, rung height and width are shown separately on each branch. If checked, total values ​​are shown.

Material appearance

The material to be used on the body, cladding, handrail and railing surfaces of the stairs is selected from the list. Surfaces are covered with the selected material and displayed as such in renderings.

Tissue length is entered into the actual tissue length. For example; If 1 is entered, the selected material texture is taken as 1 meter and covered on the relevant walls.

The angle is the angle of the texture.

In the U and V shift, the motion value in the x and y plane of the texture is entered.

With U and V mirroring, the texture is symmetrical with respect to the y and x planes.

By selecting the single material option, the material selected in the "Body" is used on all surfaces of the wall.

Handrail profiles

Select a handrail from the list of handrails by clicking with the left mouse button.

The selected handrail section is displayed on the handrail screen.

Railing profiles

Select a scarecrow from the list of scarecrows by clicking the left mouse button.

The selected scarecrow image is displayed on the railing screen.