...
Double-click the combination to change settings. The unification dialog will open.
| Table of Contents |
|---|
...
Plates Tab
The geometric features of the forehead end plate can be changed by considering the figure indicated in the schematic representation.
...
Main
...
Plate Tab
The geometric properties of the main plate can be changed by taking into account the figure indicated in the schematic representation.
...
Plate Type Tab
...
The plate type and geometric features can be changed by considering the shape indicated in the schematic representation.
...
Truss Bolts Tab
The geometric features of the shear truss bolts can be changed by considering the figure indicated in the schematic representation.
...
Bolt properties: Bolt classgrade, bolt diameter size and hole properties are set in bolt properties.
Bolts Tab
The geometric features of the bolts on the frontal end plate can be changed by considering the figure indicated in the schematic representation.
...
Bolt properties: Bolt classgrade, bolt diameter size and hole properties are set in bolt properties.
...
Welds Tab
The source weld properties of the joints connections given in the schematic representation are set in the Resources Welds tab. Give the thicknesssize, type, angle values and mark the option whether to weld under construction site conditions.
...
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the joint connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.
Design
...
Data Tab
Plate material strength is defined in design inputs.
...
If necessary, click the list and define "new plate materialCreate New…". To create a welding electrode, provide the Name and Strength information the plate material, give the information "Name" and "Strength" in the dialog that opens after clicking "Create New".