...
Specifications | Descriptions |
|---|---|
Type list | The stairs are organized under folders according to their types. The staircase to be drawn is selected under these folders. |
Plan | The plan view of the selected stair is included. |
Perspective | It has a three-dimensional view. It is possible to zoom in, zoom out, rotate the 3D image. In this way, the properties of the stairs can be examined in three dimensions. |
Inverted stair  | By marking it changes the exit direction of the stair flight. |
Description | The description written for the stair is displayed on the Description line. User cannot intervene on this line. |
Construction Tab
...
Specifications | ExplainedDescriptions |
|---|---|
Construction types  | One of the straight, folded, lemon beam bridge board and ramp type ladder stair systems is selected by clicking with the left mouse button.Step |
Riser parameters  | D1 is the tread lining step cladding nose length, D2 is the pier lining riser cladding thickness, D3 is the rung lining step cladding thickness. If coating cladding is not desiredwanted, these values are entered as zero.Lemon beam |
Stair cheek parameters  | LK1 and LK2 determine the lemon beam bridge board height. It is shown on the figure. The thickness parameter is the lemon beam bridge board thickness.Ladder name |
Stair ID  | The name of the ladder stair is entered. |
Stair elevation  | The lower point of the stairs is the elevation measured from the floor floorbase. |
Number of railing surfaces  Baluster face count | The number of railing baluster surfaces determines the number count of railing vertical surfaces (railing section). If the number count of railing baluster surfaces is 4, the parapet cross section becomes square. |
After printing No. write  Don’t write step numbers after | The digits after the digit number entered here are not numbered on the ladderstair. |
Drawthesection line  | If it is desired wanted to draw a section line on the ladderstair, it is marked. |
Static Tab
...