The advanced Duplicate Object array command has been developed to duplicate clone objects on a specific line. This pattern line can consist of lines, circles, arcs, or curves.
| Table of Contents |
|---|
...
Location of the Advanced
...
Array Command
...
Clone Advanced Array command can be run from the toolbar on the left side of the program.
...
In addition, the Drawings tab is available under the Edit heading.
...
Options in the Advanced
...
Array Dialog
...
OptionsSpecifications | ExplainedDescriptions |
|---|---|
Distance | If selected, objects are reproduced based on the range (meters) entered here. The distance between the base points of two duplicated objects is the distance entered in this box. |
PieceCount | If selected, objects are reproduced based on the number entered here. This number of objects are placed at equal intervals on the reproduction line. |
Rotate objects | If checked, the duplicated objects will be rotated due to slope changes in the pattern line. |
Deleteroadpath objects | If checked, the reference pattern line is deleted after objects have been duplicated. If not checked, the propagation line is not deleted. |
...
Usage Steps With an Example:
First, determine the pattern line by drawing line, circle, arc, curve (open or closed Bezier, Nurbs) objects. The pattern line can be just a circle, line, arc or a combination of these.
...