Page Comparison

The polar pattern array command has been developed to duplicate clone objects at an angle around a specific center.

Table of Contents

...

The Polar Pattern Array command can be run from the toolbar on the left side of the program.

...

In addition, the Drawings tab is available under the Edit heading.

...

...

...

Specifications	Descriptions
Increment angle	The angle value determining the distance to be left between the elements to be multiplied is entered.
Number of copies Copy count	The number of elements to be duplicated is entered.
Axial offset move	From the clicked point, how far the center will shift is entered. If zero is left, the clicked point is the center.
X axis	It is selected to create a copy center parallel to the X axis.
Y axis	It is selected to create the copy center parallel to the Y axis.
Z axis	It is selected to create the copy center parallel to the Z axis.
Selected axle Arbitrary axis	Used to determine an axis to be drawn in the image windows as the copy center.
Local to working plane active workplane	It is selected if the definition point of the working plane as the center in the copying process is desired.

...

Click on the Polar Pattern Array line on the left toolbar.
Select the object or objects you want to duplicate in the drawing area by clicking with the left mouse button.
Click the right mouse button to finish the selection.
The Polar Replication Array dialog will appear.
After making the necessary adjustments, click the Finish button, then the objects will be duplicated.

Process step	Plan view	3D perspective view
Process step	Plan view	3D perspective view
Execution of Runing the command and object selection The column will be reproduced along the circles, around the z-axis (perpendicular to the plane of the paper) axis. Nested circles have been drawn to aid the lecture.
Selection of the replication center and giving parameters Image RemovedImage Added
Final image view after polar array command execution

Versions Compared