...
Reinforced concrete and steel carrier structural systems are divided into three classes as given in Table 412.2-1, which are structural systems with high special ductility level, structural systems with limited ductility intermediate level and mixed structural systems in terms ordinary levels interms of ductility level.
In this step, it is necessary to choose according to the ductility level to be applied.
| Note |
|---|
...
Special ductility, |
...
intermediate and |
...
ordinary system choices have application limits. The program automatically checks these limits in the wizard within the framework of the items listed below and does not allow |
...
ordinary ductility level or |
...
intermediate when it is necessary. |
...
| Warning |
|---|
Theselection is automatically directed according to the conditions regarding the ductility levels of the |
...
structural systems specified in Article 4.3.4 of TBDY 2018. |
...
Structural systems with limited ductility level are not allowed to be selected for buildings classified as DTS = 1a, DTS = 2a, DTS = 3a and DTS = 4a .
...
BYS ≤ 6, and DTS and DTS = 1 = in building 2 classified as ductility mixed delivery systems are not allowed in the selection.
...
Structural systems, all of which are met by reinforced concrete frames with limited ductility level that transfer momentum, are only allowed to be selected in buildings with DTS = 3 and DTS = 4.
...
Structural systems consisting of filled (filler) or unfilled single-direction geared reinforced concrete frames will also be classified as structural systems with limited ductility level and are only allowed to be used in buildings with DTS = 3 and DTS = 4.
...
Filled (hollow) or unfilled unidirectional in the carrier system, consisting of a reinforced concrete frame gear upholstered well as, if they do not comprise pitch, ductility high concrete bond beams (clearance) and / or without screens or ductility high steel eccentric and / or regulated with bracing frames It is allowed to build ductility level mixed systems.
...
Buarada Amerikan yönetmeliği için detaylandırma yapılması gerekmektedir. |