...
The hall macro consists of two main parts called hall and sectionpartition. The sections partitions should be considered as the lower sub parts of the halls. The hall is the part added to the macro horizontally, and the part is the part added vertically.
...
Hall and
...
Partition Relationship
Section length and number can be adjusted according to the desired, while the widths vary depending on the halls.
...
Inside the hall macro, there are automatically defined column, beam, purlin, crossbrace, coating, truss, foundation, tie connection beam, wall, wind column elements. Required adjustments can be made from the hall settings dialog.
...
Element representations in the plan:
...
Element representations in Elements on front view:
...
Element illustrations in Elements on side view:
...