It is possible to change the connection types of purlins and secondary beams and the properties of the joints collectivelyconnections in a group form. The commands described below are valid for purlins and secondary beams.
How can I change the secondary beam joints connections as a group?
Changing the connection type of the secondary beams
The secondary beam properties menu is entered by double-clicking on the secondary beam group.
The desired joint preferred connection type is selected from the "connection type" list in the Extensions tab.
When the "OK" button is pressed, secondary beam connections will change.
Changing the
...
connection properties of the secondary beams
To select all the connections in the secondary beam group, hold down the Ctrl key and click on one of the secondary beam connections.
When done in In this way, all the joints connections in the sub-secondary beam group in question are selected.
When the "properties" button from the right click menu or press the crtl By right-clicking the menu or by pressing the ctrl+e keys, the combination properties of the connection will open.
From the opened window, properties such as plate thicknesses, bolt numbers and bolt distances are changed and the window is closed by pressing the "OK" button.
When the window is closed, the properties of the secondary beam joints connections are changed.