...
The values on the left in the basic upper level column indicate the total height of the floor story ceiling or floor story according to the Static Structural or Architectural level elevation options. The values on the right indicate the total heights above and below the rigid floor story according to the rigid floor story assumptions.
Objects to be entered into floor story windows can be divided into three parts according to their location on the floorstory.
Objects on the floor story (wall, foundation, placezone, door-window, etc.)
Objects on the floor story ceiling (beam, floorslab, etc.),
Objects on both the floor story and ceiling (columns, axes, etc.).
In the program, the floor story base is called "Architectural Plan Mode" and the floor story ceiling is called "Formwork Structural Plan Mode". Objects on the floor story can be entered in the architectural plan mode. It is not possible to enter these objects in pattern layout mode. The opposite is true for floor story ceiling objects. Objects such as columns, axes and lines can be entered in both drawing modes. In Architectural Plan Mode, click the Image View/Mode/ Architectural Plan-Formwork PlanStructural Design Mode icon in the Tools / Architectural Plan / Formwork Plan row ribbon menu to switch to Formwork Structural Plan Mode . This can also be done by pressing Shift + Tab on the keyboard.
See also: