...
Boundary Tab
...
Specifications | ||||||
|---|---|---|---|---|---|---|
TypesSamples   Four types are defined as general, type1, type2, and type3, and each type is associated with a material. Assign the materials you want to the type you want from the material list on the side by selecting the types from the table. | ||||||
MaterielMaterial   Clicking the arrow opens the list of available items. Select the appropriate material from the list. | ||||||
Actual tissue Texture world length   Tissue Texture length is entered. For example; If 1 is entered, the width of the selected material texture is taken as 1 unit and overlaid on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side. | ||||||
Priority   The border determines the priority of intersection in horizontal mullions and vertical recordstransoms. The smaller the value, the higher the priority and the intersection of that element is made ahead of the others. | ||||||
GeneralGeneric   When checked, the profiles (registration and caps) that limit the curtain wall element appear. | ||||||
Stored record  Butt-glazed  When marked, the profiles (registers registration and coverscaps) that limit the curtain wall element are not visible (stored) on the façade facade of the building, but visible internally (from the interior of the building). | ||||||
NoInvisible   When marked, the profiles that limit the curtain wall element are completely closed. (It does not appear in any direction.) | ||||||
Offsets   The geometric properties of the profile forming the curtain wall element boundary are given according to the parameters shown in the diagram. These parameters can change according to the general, stored record and non-existent generic, butt-glazed and invisible type.
|
Mullion Tab
...
Specifications | ||||||
|---|---|---|---|---|---|---|
TypesSamples Four types are defined as general, type1, type2, and type3, and each type is associated with a material. Assign the materials you want to the type you want from the material list on the side by selecting the types from the table. | ||||||
MaterielMaterial Clicking the arrow opens the list of available items. Select the appropriate material from the list. | ||||||
Actual tissue Texture world length Tissue Texture length is entered. For example; If 1 is entered, the width of the selected material texture is taken as 1 unit and overlaid on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side. | ||||||
Priority   The border determines the priority of intersection in horizontal mullions and vertical recordstransoms. The smaller the value, the higher the priority and the intersection of that element is made ahead of the others. | ||||||
GeneralGeneric When checked, the curtain wall element vertical registration profiles (registration and hatches) caps) that limit the curtain wall element appear. | ||||||
Stored record Butt-glazed When marked, the curtain wall element vertical registration profiles (registers registration and covers) caps) that limit the curtain wall element are not visible (stored) on the façade facade of the building, but visible internally (from the interior of the building). | ||||||
NoInvisible When marked, the profiles that limit the curtain wall element vertical registration profiles are completely closed. (It does not appear in any direction.) | ||||||
Offsets   The geometric features properties of the profile forming the vertical registration of the curtain wall element mullions are given according to the parameters shown in the diagram. These parameters can change according to the general, stored record and non-existent generic, butt-glazed and invisible type.
|
Transom Tab
...
Specifications | |||||
|---|---|---|---|---|---|
Types Four types are defined as general, type1, type2, and type3, and each type is associated with a material. Assign the materials you want to the type you want from the material list on the side by selecting the types from the table. | |||||
Materiel Clicking the arrow opens the list of available items. Select the appropriate material from the list. | |||||
Actual tissue length Tissue length is entered. For example; If 1 is entered, the width of the selected material texture is taken as 1 unit and overlaid on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side. | |||||
Priority  The border determines the priority of intersection in horizontal and vertical records. The smaller the value, the higher the priority and the intersection of that element is made ahead of the others. | |||||
General When checked, the curtain wall element horizontal registration profiles (registration and hatches) appear. | |||||
Stored record When marked, the curtain wall element horizontal registration profiles (registration and covers) are not visible (stored) on the facade of the building, but visible from the inside (from the interior of the building). | |||||
No When marked, the curtain wall element horizontal registration profiles are completely closed. (It does not appear in any direction.) | |||||
Offsets  The geometric features of the profile forming the horizontal record of the curtain wall element are given according to the parameters shown in the diagram. These parameters can change according to the general, stored record and non-existent type.
|
...