Page Comparison

Concrete cover

Image Removed

Image Added

It is the distance from the center of gravity of the reinforcement to the outer face of the concrete.

Min. tensile reinforcement pursuitpercentage

Image Removed

Image Added

In the tensile zone, give the minimum percentage value to be used in the reinforcement rebar calculation. The entered value is multiplied by the cross- sectional area and the reinforcement rebar selection is made in a way that is not less than the result.

Min. tensile reinforcement rangeinterval

Image Removed

Image Added

In the tensile zone, give the smallest possible distance between two reinforcement rebar bars. This value is taken into consideration in the selection of reinforcementrebar.

Max. tensile reinforcement rangeinterval

Image Removed

Image Added

In the tensile zone, give the value of the greatest possible distance between two rebars. This value is taken into consideration in the selection of reinforcementrebar.

Min. transverse reinforcement pursuitpercentage

Image Removed

Image Added

Give the minimum percentage value to be used in horizontal reinforcementsrebars. The entered value is multiplied by the cross- sectional area and the reinforcement rebar selection is made in a way that is not less than the result.

Max. transverse interval

Image Added

Give the smallest possible distance between two rebars for use in horizontal rebars. This value is taken into consideration in the selection of rebar.

Max. transverse reinforcement rangeinterval

Image Removed

Image Added

Give the maximum possible distance between two reinforcement bars to be used in horizontal reinforcements. This value is taken into consideration in the selection of reinforcement.

Min. pressure reinforcement pursuit

Image Removed

compression percentage

Image Added

In the pressure zone, give the minimum percentage value to be used in reinforcement rebar calculation. The entered value is multiplied by the cross- sectional area and the reinforcement rebar selection is made in a way that is not less than the result.

Min. pressure reinforcement range

Image Removed

compression interval

Image Added

Give the smallest possible distance between two reinforcing bars in the pressure zone. This value is taken into account in the selection of reinforcement.

Max. pressure reinforcement range

Image Removed

compression interval

Image Added

Give the maximum possible distance between two reinforcing bars in the pressure zone. This value is taken into consideration in the selection of reinforcement.