Page Comparison

SehimDeflection

Image Removed

Image Added

Komb .Combo: It is the combination that creates the most unfavorable section forces.
Deflection: It is the deflection formed in the honeycomb beam.
Span: Honeycomb is the length of the beam.
Upper Limit value: The upper deflection value of the beam according to the regulation.
Ratio: It is the ratio of deflection made by the beam to the limit value.

Cut Shear (Gross)

Image Removed

Image Added

Komb .Combo: It is the combination that creates the most unfavorable section forces.
Location: It is the position of the section forces taken into account in the design on the beam.
Vu: It is the shear force acting on the element.
Vc: It is the shear force capacity of the element.
Ratio : It is the ratio of the shear force of the element to the capacity.

Cutting Shear (Net)

Image Removed

Image Added

Combo: It is the combination that creates the most unfavorable section forces.
Location: It is the position of the section forces taken into account in the design on the beam.
Vu: It is the shear force acting on the element.
Vc: It is the shear force capacity of the element.
Ratio: It is the ratio of the shear force of the element to the capacity.

Horizontal cuttingshear

Image Removed

Image Added

Komb .Combo: It is the combination that creates the most unfavorable section forces.
Location: It is the position of the section forces taken into account in the design on the beam.
Vu: It is the shear force acting on the element.
Vc: It is the shear force capacity of the element.
Ratio: It is the ratio of the shear force of the element to the capacity.

Body sprain

Image Removed

Komb .Web post buckling

Image Added

Combo: It is the combination that creates the most unfavorable section forces.
Location: It is the position of the section forces taken into account in the design on the beam.
Mu: It is the moment value acting on the element.
Mc: Moment capacity of the element.
Ratio: It is the ratio of the moment acting on the element to the capacity.

Vierendeel bending

Image Removed

Image Added

Komb .Combo: It is the combination that creates the most unfavorable section forces.
Location: It is the position of the section forces taken into account in the design on the beam.
Pu: It is the axial load value.
Mu3: It is the moment value acting on the element in 3 direction.
Pc: The axial load capacity of the honeycomb beam.
Mc3: It is the moment capacity of the element in 3 directions.
Interaction equation: It is the interaction equation used in ratio calculation.
Ratio: It is the moment-capacity ratio found by the interaction equation.

i

Image Removed

Image Added

The body web post and body cavities openning in the honeycomb castellated beam are listed.

x

It shows the location where the relevant forces and moments are located.

Seen

It is the shear force acting on the element.

Mu

It is the moment value acting on the element.

Pv

It is the axial force value.

Mv

It is the moment value acting on the element.

Vh

Shear force acting on the element.

Mh

It is the moment value acting on the element.