...
In the rail profiles table, in the first row named N = 1, make the height 1 meter and click the profile column.
Select the 2x2 cm sized profile that we previously defined and saved to the archive from the drop-down list.
Click the Copy button under the table. The 2nd line will be formed.
In line 2, enter 0.75 in height and confirm that 2x2 cm is selected as the profile. (Same happened because we copied the line)
Click the Copy button under the table. The 3rd line will be formed.
In line 3, write the height 0.50 and confirm that 2x2 cm is selected as the profile.
Click the Copy button under the table. The 4th line will be formed.
In line 4, enter 0.25 in height and confirm that 2x2 cm is selected as the profile.
After this process, the process of creating the rail type is finished. The image of the railing can be viewed on the right in the dialogue.
Click the OK button to exit the railing settings.
The Click the railing command is active.
You can draw the railing you have created by clicking the points in the drawing area.
...
Click row 2.
Select the base rail index value from the list to set it to 4.
Similarly click on row 3.
Select the base rail index value from the list to set it to 4.
After this process, the process of creating the railing type is finished. The image of the railing can be viewed on the right in the dialogue.
Click the OK button to exit the railing settings.
The Click the railing command is active.
You can draw the railing you have created by clicking the points in the drawing area.
...
Usage step |
|---|
Clicking the delete button on the N = 2 line  |
Clicking the delete button on the N = 3 line  |
Changing the railings   |
Changing Balusters
...
Usage step |
|---|
Selecting none of the profile for the line N = 2   |
Selecting none of the profile for the line N = 3   |
Changing the railings   |
Creating the
...
Plate
...
In the
...
plate table;
Add a new plate to the plates table and click by clicking the Add button.
Click on the lower base rail index column and select the value 2 from the list.
Click on the left rail baluster index column and select the value 2 from the list.
Go to the right rail baluster index column and select 3 from the list
Come to the thickness column and give the value 1 cm.
Scroll to the Material column and select the Glass material from the list .
After this process, the process of creating the railing type is finished. The image of the railing can be viewed on the right in the dialoguedialog.
...
Click the OK button to exit the railing settings.
The Click the railing command is active.
You can draw the railing you have created by clicking the points in the drawing area.
Process step |
|---|
Adding the plate by clicking the add button in the plates table  |
Selecting the base rail index value 2 from the list  |
Choosing the left baluster index value 2 from the list  |
Selecting the right baluster index value 3 from the list  |
Giving the thickness value 0.01 and choosing glass as the material  |
Creating the plate and completing the railing type  |