...
Usage step |
|---|
Choosing the profile of N = 1 line as 2x2 cm  |
Clicking the copy button  |
Writing 0.75 as the height value of the line N = 2  |
Clicking the copy button and writing 0.50 as the height value of the N = 3 line.  |
Clicking the copy button and writing 0.25 as the height value of the N = 4 line.  |
The formation of rails  |
Creating Railing Type 2
Using the created railing to make the railing shown below:
...
The numbers shown in the figure in the horizontal and vertical directions are the index numbers of the handrail rails and balusters. (These are the values that will appear as N in the table)
Creating Balusters
In the baluster profile table;
First, two balusters will be added in between.
On the N = 2 line, click the Copy To Front button 2 times to add 2 more railing profiles.
Come to the line N = 2 and make the distance value 20 cm. Click on the profile column and select the 2x2 cm profile.
Come to the line N = 3 and make the distance value 80 cm. Click on the profile column and select the 2x2 cm profile.
Come to the line N = 4 and make the distance value 20 cm.
...
Process step |
|---|
Adding 2 more balusters by clicking the Add Before button 2 times while in the N = 2 line  |
Writing 0.2 as the distance value for the line N = 2 and selecting 2x2 cm as the profile  |
Writing 0.8 as the distance value for the line N = 3 and choosing 2x2 cm as the profile  |
Writing 0.2 as the distance value for the line N = 4  |
Formation of railing  |
Arrangement of Rails
Left/right rails index numbers must be changed to match the figure. These appear in the table by default.
...
Point to the 2nd rail row.
Set the left rail index value to 2 by selecting it from the list. This change means that the rail in the 2nd row will end at the 2nd railing from the left. Likewise, make the Right rail index 3.
Come to the 3rd rail row.
Select the left rail index value from the list and set the right rail index value to 3.
Process step |
|---|
Selecting the left baluster index value as 2 from the list and the right baluster index value from the list when N = 2 line  |
Selecting the left baluster index value as 2 from the list and the right baluster index value from the list when N = 3 line  |
Change of rails  |
Arrangement of Railing Profiles
In the rail profile table;
...