...
First, two balusters will be added in between.
On the N = 2 line, click the Copy To Front button 2 times to add 2 more railing profiles.
Come to the line N = 2 and make the distance value 20 cm. Click on the profile column and select the 2x2 cm profile.
Come to the line N = 3 and make the distance value 80 cm. Click on the profile column and select the 2x2 cm profile.
Come to the line N = 4 and make the distance value 20 cm.
Process Usage step |
|---|
Adding 2 more balusters by clicking the Add Before button 2 times while in the N = 2 line  |
Writing 0.2 as the distance value for the line N = 2 and selecting 2x2 cm as the profile  |
Writing 0.8 as the distance value for the line N = 3 and choosing 2x2 cm as the profile  |
Writing 0.2 as the distance value for the line N = 4  |
Formation of railing  |
...
Point to the 2nd rail row.
Set the left rail index value to 2 by selecting it from the list. This change means that the rail in the 2nd row will end at the 2nd railing from the left. Likewise, make the Right rail index 3.
Come to the 3rd rail row.
Select the left rail index value from the list and set the right rail index value to 3.
Process Usage step |
|---|
Selecting the left baluster index value as 2 from the list and the right baluster index value from the list when N = 2 line  |
Selecting the left baluster index value as 2 from the list and the right baluster index value from the list when N = 3 line  |
Change of rails  |
Arrangement of
...
Balusters
In the rail profile baluster table;
Click row 2.
Select the lower base rail index value from the list to set it to 4.
Similarly click on row 3.
Select the lower base rail index value from the list to set it to 4.
After this process, the process of creating the railing type is finished. The image of the railing can be viewed on the right in the dialogue.
...
Click the OK button to exit the railing settings.
The railing command is active.
You can draw the railing you have created by clicking the points in the drawing area.
Usage step |
|---|
Selecting the base rail index value as 4 from the list when in the N = 2 line  |
Selecting the base rail index value as 4 from the list when in the N = 3 line  |
Changing the balusters and completing the railing type  |
Creating Railing Type 3
Making a railing with plates:
...