Page Comparison

Usage steps

Terrain before the hole is created

Image Removed

Image Added

Entering the elevation value (-50 cm) into the terrain toolbar opened while in the hole command

Determining the first point of the closed polygon to be created for the hole

Determining the second point of the closed polygon

Before determining the third point of the closed polygon, entering the new elevation value (50 -25 cm) in the terrain toolbar

Image Removed

Image Added

Determining the third point of the closed polygon

Determining the fourth point of the closed polygon

Entering the new level value (-50 cm) in the toolbar for the last point of the hole

Determining the end point of the closed polygon

The formation of the hole

Image Removed

Image Added

Terrain after the hole has been created

Image Removed

Image Added

Elevation edit

Image Removed

Image Added

The coordinates of the elevation points placed are given. If wanted, a new value can be entered into the z box.

All nodes have this fixed elevation value

The feature is activated and the value entered here is applied to all elevation points.

Color

The drawing color of the space line in the plan. When the color box is clicked, the appropriate color is selected from the window that opens.

Line style

The line type of the hole line in the plan is selected. Clicking the down arrow buttons to the right of the boxes opens the list of line types. From this list, the desired line type is selected by clicking with the left mouse button.

Material

You can select the material of the hole top surface by clicking it from the list.

Side material

You can select the material of the hole side surfaces by clicking on the list.

Texture world length

Texture length is entered. For example; If 1 meter is entered, the selected material texture is taken as 1 meter and covered on the selected object. Considering that the texture is in the form of a square, the object surfaces are covered with 1x1 textures arranged side by side.

Angle

The angle of the texture is given. With the angle value, you can adjust the angle of the texture according to the direction of its plane.

Excavation step

Terrain and pieces of terraşn are given numbers for excavation calculations. The excavations of the terrain and terrain plots with the same number are calculated and shown as total value at once, and the excavation of the terrain or terrain plots that are numbered separately as a separate item.