...
4 Bolts Unstiffened End Plate Connection Settings Dialog
Type and End Plates Tab
...
...
t = Plate thickness
...
Specifications |
|---|
End plate  The end plate is determined by entering the values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connectio and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Bolts Tab
...
Specifications |
|---|
...
Determine the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
...
Stiffeners Tab
...
Horizontal arrangement  The horizontal arrangement distance value of bolts is entered. The values to be entered are shown in the schematic drawing. |
Group 1  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Group 2  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Group 3  The distance value of the bolts to the beam is entered. The values to be entered are shown in the schematic drawing. |
Bolt properties  The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Stiffeners Tab
...
Specifications |
|---|
Continuity plate  The purpose of the continuity plates is to support the column heads in the column-beam |
...
joints and to ensure the continuity of the beam head. Continuity plates are used for reinforcement in order to bend the column head and prevent column stem flow / wrinkle. If a continuity plate will be made, the option is marked. |
...
Continuity plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Extra Plates Tab
...
Body reinforcement board properties are set in this tab. If the column body thickness is insufficient, reinforcement plates are used to meet the shear effect of the panel area. If the body reinforcement plate will be made, the option is marked. The geometric properties of the sheet are adjusted according to the schematic picture given.
...