...
Welded Flange Plate Connection Settings Dialog
...
Type and Plates Tab
Plate properties are adjusted according to the schematic information given.
...
Retaining Boards Tab
...
Specifications |
|---|
Type and geometry  The distance between column head and beam section is entered. The values to be entered are shown in the schematic drawing. |
Flange plate  Flange plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Flange shim  Shim is a plate placed between the elements to be connected in bolted connections. If shim is to be made, the option is selected and t2, thickness value is given. |
Connection plate  Connection plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Stiffeners Tab
...
Specifications |
|---|
Continuity plate  The purpose of the continuity plates is to support the column heads in the column-beam |
...
joints and to ensure the continuity of the beam head. Continuity plates are used for reinforcement in order to bend the column head and prevent column stem flow / wrinkle. If a continuity plate will be made, the option is marked. |
...
Continuity plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Web doubler plate  If the column body thickness is insufficient, |
...
web doubler plates are used to meet the shear effect of the panel area. If the |
...
webdoubler plate will be made, the option is marked |
...
Plate Bolts Tab
Determine the number of bolts connecting the plate to the beam and the distances between bolts according to the schematic representation given.
...
. Web doubler plate is determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Plate Bolts Tab
...
Specifications |
|---|
Group 1  Bolt distance values are entered. The values to be entered are shown in the schematic drawing. |
Bolt properties  The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Chamfers Tab
For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined in the connection settings dialog.
...