...
8 Bolts Stiffened End Plate Connection Settings Dialog
...
Type and End Plates Tab
...
Specifications |
|---|
End plate  The end plate is determined by entering the values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the |
...
preview. |
...
Brackets Tab
The features of the end plate are adjusted according to the schematic information given.
...
Brackets Tab
Determine the dimensions of the bracket formed above and below the steel beam according to the schematic figure given.
...
Bolts Tab
...
The properties of the bolts connecting the front plate and the column body are set in this tab.
Determine the distances between bolts according to the schematic representation given.
...
Specifications |
|---|
Brackets  Brackets are determined by entering values. The values to be entered are shown in the schematic drawing. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Bolts Tab
...
Specifications |
|---|
Horizontal arrangement  The horizontal arrangement distance value of bolts is entered. The values to be entered are shown in the schematic drawing. |
Group 1  Distance values of bolts to beam and other bolts are entered. The values to be entered are shown in the schematic drawing. |
Group 2  Distance values of bolts to beam and other bolts are entered. The values to be entered are shown in the schematic drawing. |
Group 3  Distance values of bolts to beam and other bolts are entered. The values to be entered are shown in the schematic drawing. |
Bolt properties  The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Retaining Boards Tab
The purpose of the continuity plates is to support the column heads in the column-beam connections and to ensure the continuity of the beam head. Continuity plates are used for reinforcement in order to bend the column head and prevent column stem flow / wrinkle. If a continuity plate will be made, the option is marked. The geometric properties of the sheet are adjusted according to the schematic picture given.
...