...
Splice Connection Settings Dialog
Type Tab
...
...
Specifications |
|---|
Type |
...
 For the connection, one of the welded, bolted |
...
, hybrid or hybrid (reversed) connection types is selected. |
...
Schematic drawing |
...
 The |
...
connection is shown on the schematic drawing. |
Preview  There is a preview of the |
...
Flange Bolts Tab
Determine the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
...
Web Bolts Tab
Determine the distances between bolts according to the schematic representation given.
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
...
Welds Tab
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
...
connection. The selection made and the entered values can be followed simultaneously in the preview. |
Plates Tab
...
Specifications |
|---|
Dimensions  Plate sizes are determined by entering values. The values to be entered are shown in the schematic drawing. |
Flange shim  Shim is a plate placed between the elements to be connected in bolted connections. If shim will be made, the option is checked and t 3 , thickness value is given. |
Web shim  Shim is a plate placed between the elements to be connected in bolted connections. If shim is to be made, the option is selected and t 4 , thickness value is given. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Flange Bolts Tab
...
Specifications |
|---|
Horizontal arrangement  The horizontal arrangement distance value and number of bolts are entered. The values to be entered are shown in the schematic drawing. |
Group 1  Bolt distance values are entered. The values to be entered are shown in the schematic drawing. |
Bolt properties  The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Web Bolts Tab
...
Specifications |
|---|
Horizontal arrangement  The horizontal arrangement distance value and number of bolts are entered. The values to be entered are shown in the schematic drawing. |
Group 1  Bolt distance values are entered. The values to be entered are shown in the schematic drawing. |
Bolt properties The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog. |
Schematic drawing  Connection and bolt placement values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Welds Tab
...
Specifications | |||||
|---|---|---|---|---|---|
Welds  The thickness, type and angle values of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered. | |||||
Weld electrode  The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength. If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".
| |||||
Schematic drawing  Connection and weld values are shown on the schematic drawing. | |||||
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Design Data Tab
...
In the design data, the plate material is defined. The condition that the main element in the weld joint has less strength than the weld strength is controlled.
...
If necessary, click the list and define "Create New…". To create the welding electrodeplate material, give the information "Name" and "Strength" material definations and values in the dialog that opens after clicking "Create New".