This connection is a steel beam - secondary steel beam connection.
...
| Table of Contents |
|---|
...
Stiffened End Plate Connection Settings Dialog
...
General Tab
...
Give the values according to the schematic figure given.
...
If a stiffener plate is to be created, check the back stiffener plate option and give the plate thickness.
...
Chamfers Tab
...
For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined in the connection settings dialog.
...
Bolts Tab
...
Set the count of bolts and spacing according to the schematic figure given.
...
Bolt properties: Bolt grade, bolt size and hole properties are set in bolt properties.
Welds Tab
...
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
...