...
Built Up Column Connection Dialog
Construction Tab
...
Pattern Tab
...
Select from the list with which pattern type the column will be connected. You can also choose the alignment horizontally or vertically.
...
Parameters Tab
...
You can give the geometry of the plate to be created along the column height according to the shape shown or you can use one of the profiles in the library as a connection element with the Use Section option.
...
Welds Tab
...
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
...
...
Specifications |
|---|
Distance  By selecting the option, patterns are determined by entering the plate distance values. The values to be entered are shown in the schematic drawing. |
Count  By checking the option, patterns are determined by entering the count. The values to be entered are shown in the schematic drawing. |
Connection  Welded or bolted types are selected for plate connection. |
Alignment  Alignment of the plates according to the column is determined by choosing one of the middle or corner options. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview  There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Pattern Tab
...
Specifications |
|---|
Pattern  One of the listed pattern types is selected. |
Edge type  One of the listed edge types is selected. |
Element alignment to first column  Element alignment to the first column is determined by checking the horizontal or perpendicular option. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Parameters Tab
...
Specifications |
|---|
Use plate  If the option is selected, it is determined by entering the plate values. The values to be entered are shown in the schematic drawing. |
Material  The material is selected for the created sheet. |
Use section  By selecting the option, one of the ready profiles is selected from the lists as a plate. By clicking on the Load section button, you can reach the ready section library and reach the list of American and European finished rolling sections and select from the list. The selected profile can be rotated if desired. |
Schematic drawing  Connection and plate values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |
Welds Tab
...
Specifications | |||||
|---|---|---|---|---|---|
Welds  The thickness, type and angle values of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered. | |||||
Weld electrode  The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength. If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".
|
...
Schematic drawing  Connection and weld values are shown on the schematic drawing. |
Preview There is a preview of the connection. The selection made and the entered values can be followed simultaneously in the preview. |