Page Comparison

Pattern

One of the listed pattern types is selected.

Edge type

One of the listed edge types is selected.

Element alignment to first column

Element alignment to the first column is determined by checking the horizontal or perpendicular option.

Preview

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Use plate

If the option is selected, it is determined by entering the plate values. The values ​​to be entered are shown in the schematic drawing.

Material

The material is selected for the created sheet.

Use section

By selecting the option, one of the ready profiles is selected from the lists as a plate. By clicking on the Load section button, you can reach the ready section library and reach the list of American and European finished rolling sections and select from the list. The selected profile can be rotated if desired.

Schematic drawing

Connection and plate values ​​are shown on the schematic drawing.

Preview

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Welds

The thickness, type and angle values ​​of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered.

Weld electrode

The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength.

If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".

Expand
title Moreover
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.

Schematic drawing

Connection and weld values ​​are shown on the schematic drawing.

Preview

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.