Combines two columns according to the given knitting type.
...
| Table of Contents |
|---|
...
Location of Column-Column Connection (Built Up Column) Command
You can access it under the ribbon menu, Connection tab, Experimentals title.
...
Usage Steps
From the Steel menu, click on the Constructive Unions Experimentals/Column-Column Combination Connection (Made Built Up Column) line.
In a 3D perspective view, plug click the first, then the second, of the columns to be joined.
The combination connection will occur with default settings.
Double-click the combination connecyion to change settings.
The unification built up column connection dialog will open.
...
.
Location of the Built Up Column Connection Dialog
Select the connection and click the right mouse button. Click the Properties line from the right click menu that opens.
...
Built Up Column Connection Dialog
Construction Tab
...
The count of plates to be formed along the column height is determined by distance or count. Check the option. If you select the distance option, adjust the distance values according to the given figure. The connection of the elements with the column can be welded or bolted.
...
Pattern Tab
...
Select from the list with which pattern type the column will be connected. You can also choose the alignment horizontally or vertically.
...
Parameters Tab
...
You can give the geometry of the plate to be created along the column height according to the shape shown or you can use one of the profiles in the library as a connection element with the Use Section option.
...
Welds Tab
...
The weld properties of the connections given in the schematic representation are set in the Welds tab. Give the size, type, angle values and mark the option whether to weld under construction site conditions.
...