| Tip |
|---|
Rigid and semi-rigid diaphram conditions should be choosen by user according to irregularities defined in ASCE 7/16. |
| Tip |
|
| Tip |
|---|
|
...
|
...
International Design Codes
ACI 318-19 : One-Way Slab Required Strength
TSC 2018 :
...
Symbols in ACI 318-19
Mu = factored flexural moment at section, lb
Mn = nominal flexural strength at section, in.-lb
Vn = nominal shear strength, lb
Vu = factored shear force at section, lb
...
Required strength is designed to analyse with Load Factors load factors and Combinationscombinations. Analysis is done automatically according to finite element method. Rigid and semi-rigid diaphram conditions should be choosen by user according to ASCE 7/16.
Factored moment
Mu at the support is calculated at the face of support for slabs built integrally with supports.
Factored Shear
Vu at the support is calculated at the face of support for slabs built integrally with supports. Sections between the face of support and a critial section located d from the face of support for nonpresressed slabs is designed for Vu at the critical section if the rules satisfied:
...
Support reaction, in direction of applied shear, introduces compression into the end region of the slab
...
Loads are applied at or near the top surface of the slab
...
Codes