...
You can access it under the ribbon menu Concrete tab, Project Settings title
...
Story Settings
...
Specifications | |||||
|---|---|---|---|---|---|
Story number  The stories in the project are numbered. | |||||
Name  The stories in the project are listed. The names can be changed at any time by clicking on it. | |||||
Elevation  Story elevation is given according to the selected architectural/structural elevation option. It represents the floor elevations of the stories if the architectural elevations option is active, and the ceiling elevations if the structural elevations option is active. | |||||
Height  Story heights are given. | |||||
Elevation from ground  Indicates the total height of the story ceiling or floor according to the structural or architectural elevation options. The ground elevation line does not represent a story and cannot be interfered with by the user. | |||||
LLF  LLF values of stories are given. | |||||
Rigid  The rigidity of a story is determined by placing a check in the Rigid box of the relevant story. | |||||
Stair/Machine room  When calculating the earthquake, the stair/machine room box is checked for the story that is not wanted to be included in the building height. | |||||
Index  If there is more than one rigid diaphragm in a story, to separate the indices of the objects belonging to these diaphragms in the story; In the index column of the relevant story, indices equal to the number of diaphragms are written using commas between them. (Ex: For Story 1; 1A, 1B, 1C etc.) | |||||
Edit  By clicking the edit button, the project settings dialog is opened, the desired adjustments are made and the stories dialog is returned. | |||||
Same as last story  If the line “Same as last story” is checked, the height of the opened stories is taken as the same as the last opened story. | |||||
Default height  If "Default height" is checked, the height of the opened story is taken as the value that can be defined next to the default height line. | |||||
Architectural elevation  If the option is selected, the elevation values in the dialog are displayed with reference to the story floors. | |||||
Structural elevation  If the option is checked, the elevation values in the dialog are displayed with reference to the story ceilings. | |||||
Open  The story plan page selected from the list opens. | |||||
Delete  The selected story plan page is deleted from the list. The master coat (zero number coat) cannot be deleted.
| |||||
Add above  A new story is added above the story selected from the list. | |||||
Add below  A new story is added below the selected story from the list. |