Page Comparison

Slab thickness

Give the thickness of the pool slab.

Depth

Give the measured height of the water surface above the floor of the pool.

Depth difference

Check out setting swimming pool surface slope and setting the swimming pool surface properties.

Surface angle

Check out setting swimming pool surface slope and setting the swimming pool surface properties.

Slope angle in plan

Check out setting swimming pool surface slope and setting the swimming pool surface properties.

Water elevation

Indicate the level of water that will fill in the pool.

Slab material

Select the view of the pool floor to be displayed in the solid model from the list.

Texture world length

Texture length is entered. For example; If 1 is entered, the width of the selected material texture will be taken as 1 unit and will be covered on the selected object. If the texture is considered to be in the form of a square, the object surfaces are covered with 1x1 textures aligned side by side.

Visibility

Check if you want water to be visible on the solid model. Otherwise, do not mark it.

Moment calculation angle

In automatic selection, it is the preferred option in most cases. However, in special systems, give the account angle at the desired value.