Page Comparison

Top flange connection type

Image Modified

Connection type is selected for the top header.

Schematic drawing

Image Modified

Connection and placement values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Persistence plate

Image Modified

Persistance plate is determined by entering the value. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Shear connection type

Image Modified

The shear connection type is selected.

Connection type

Image Modified

Welded or bolted connection types are selected.

Bottom flange connection type

Image Modified

Connection type is selected for the bottom flange.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Pressure plate

Image Modified

The pressure plate is determined by entering the value. The values ​​to be entered are shown in the schematic drawing.

General

Image Modified

The value is entered to determine the location of the plate according to the beam section. The values ​​to be entered are shown in the schematic drawing.

End plate

Image Modified

The end plate is determined by entering the value. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Notch

Image Modified

If the option is selected, notch is done according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Left flange cut

Image Modified

If the option is selected, left flange cutting is made according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Right flange cut

Image Modified

If the option is selected, right flange cutting is made according to the entered values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection, notching and cutting values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Welds

Image Modified

The thickness, type and angle values ​​of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered.

Weld electrode

Image Modified

The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld joint is controlled under the condition that it has less strength than the weld strength.

If necessary, click the list and define "Create New…". To create the welding electrode, give the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".

Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC.

Image Modified

Schematic drawing

Image Modified

Connection and weld values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Horizontal arrangement

Image Modified

The horizontal arrangement distance value of the bolts is entered. The values ​​to be entered are shown in the schematic drawing.

Group 1

Image Modified

Distance values ​​of bolts to beam and other bolts are entered. The values ​​to be entered are shown in the schematic drawing.

Bolt properties

Image Modified

The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog.

Schematic drawing

Image Modified

Connection and bolt placement values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Define plate geometry

Image Modified

If the option is selected, the assembly plate is determined by entering the values. The values ​​to be entered are shown in the schematic drawing.

Use section

Image Modified

By selecting the option, one of the ready-made L profiles is selected from the list as an assembly plate. By clicking on the Load section button, you can reach the ready section library and reach the list of American and European finished rolling sections and select from the list.

Length

Image Modified

The assemblyplate length to be used is determined by entering the value.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.