...
In the ideCAD model, the joint values of N2 - N1 - N25 - N48 were read in order, starting from the upper floor located between column C0013 and beam B016 - B017.
ideCAD Structural
...
ETABS
...
2- Inner Force Frame Results
ideCAD Structural
C0002 corner column
...
c) Modal Analysis
ideCAD Structural
...
ETABS
...
d)
...
Seismic Force Results
1- Displacement
ideCAD Structural
...
ETABS
...
2- Inner Force Frame Results
ideCAD Structural
...
ETABS
...
e) Calculation of the Amplification Factor according to the Equivalent Seismic Load Method
Eşdeğer Büyütme KatsayısıEşdeğer Deprem Yükü YöntemiAzaltılmış Tasarım İvme SpektrumuEquivalent Lateral Force Method 12.8.1.1 Seismic Response Coefficient for Equivalent Lateral Force Method
...
The information used in the calculation in the ideCAD Static Dynamic analysis report is summarized below.
...
f) Relative Floor Shift Calculation
Göreli Kat Ötelemelerin Sınırlandırılması
...
Göreli Kat Ötelemesi Lamda Değerleri Hesabı Örneği 1
...
12.12 Determination and Limitation of Story Drifts
...
The calculation made in the relative floor drift section of the ideCAD Static Earthquake regulation report is below.
...
g) Second Order Effect Calculation
İkinci Mertebe Etkileri 12.8.7 P-Delta Effects section is the philosophy of the account and how it is done. This account cannot be obtained directly from ETABS. The necessary data is taken from ETABS and calculations are made manually.
...