...
Click Structural Inspection tab in the ribbon menu.
From theOutput topicheading, open the Steel All Failureslist.
Click the Steel PMM Failures command.
...
Steel PMM failure insufficiency results will appear in the visualization window .
It means that there is no failure insufficiency in the green colored elements, and there is a failure an insufficiency in the red colored elements.
Gray colored elements are concrete elements, this control is not applied.
...
Open the Design Output list from the visualization dialog.
...
Select the PMM ratesratios line.
The PMM ratiovalues of the steel elements will be displayed in the visualization window.
PMM ratio greater than 1 means that the steel element is insufficient.
...
Open the Design Output list.
Select the deflection Deflection failure line.
Deflection control of the steel elements and results will be seen.
...
Close the visualization dialog.
Go to the STORTY 1 CEILING page.
Click on the Steel tab in the ribbon menu.
Open the Steellist in the Design section heading and click the Column command.
...