...
Specifications |
Column primary section The primary support beam section of the column formwork is selected from the list. |
Column secondary section The secondary support beam section of the column formwork is selected from the list. |
Slab primary section The primary support beam section of the slab formwork is selected from the list. |
Slab secondary section The secondary support beam section of the slab formwork is selected from the list. |
Beam primary section The primary support beam section of the beam formwork is selected from the list. |
Beam secondary section The secondary support beam section of the beam formwork is selected from the list. |
Beam upper primary section The primary upper support beam section of the beam formwork is selected from the list. |
Beam upper secondary section The secondary upper support beam section of the beam formwork is selected from the list. |
Plywood thickness Plywood plate thickness value is entered. |
Rod diameter The diameter value of the fitting (rod) is entered. |
Wind load coefficient C Wind load coefficient value is entered. |
Wind pressure load Q Wind pressure value is entered. |
Strut settlement height Support H A value is entered for the pier support settlement height. |
Strut placement width Support V A value is entered for the pier layout support settlement width. |
Support intervalstrut spacing Value is entered for the buttress rangesupport interval. |
Strut pressure axial load capacityStrut pressure Support axial load capacity value is entered. |
modulus of elasticity Modulus of elasticity value is entered separately for wood and mold material. |
bending strength The bending strength value is entered separately for wood and mold material. |
Shear strength Shear strength value is entered separately for wood and mold material. |
Fastener tensile strength Tensile strength value is entered for fasteners (rod). |
Beam strut compressive strength Compressive strength value is entered for beam uprights. |
Slab erection compressive strength Compressive strength value is entered for slab props. |
Number of successive struts, n The number of consecutive stitches is entered. |
Concrete pouring speed The value in m/hour is entered for the concrete pouring speed. |
Concrete pouring temperature A value in °C is entered for the concrete pouring temperature. |
...