...
Specifications |
Column primary section  The primary support beam section of the column formwork is selected from the list. |
Column secondary section  The secondary support beam section of the column formwork is selected from the list. |
Slab primary section  The primary support beam section of the slab formwork is selected from the list. |
Slab secondary section  The secondary support beam section of the slab formwork is selected from the list. |
Beam primary section  The primary support beam section of the beam formwork is selected from the list. |
Beam secondary section  The secondary support beam section of the beam formwork is selected from the list. |
Beam upper primary section  The primary upper support beam section of the beam formwork is selected from the list. |
Beam upper secondary section  The secondary upper support beam section of the beam formwork is selected from the list. |
Plywood thickness  Plywood plate thickness value is entered. |
Rod diameter  The diameter value of the fitting (rod) is entered. |
Wind load C  Wind load coefficient value is entered. |
Wind load Q  Wind pressure value is entered. |
Support H  A value is entered for the support settlement height. |
Support V  A value is entered for the support settlement width. |
Support interval  Value is entered for the support interval. |
Strut axial load capacity  Support axial load capacity value is entered. |
Modulus of elasticity  Modulus of elasticity value is entered separately for timber and plywood material. |
Bending strength  The bending strength value is entered separately for timber and plywood material. |
Shear strength  Shear strength value is entered separately for timber and plywood material. |
Rod yield stress  Yield strength value is entered for rods. |
Beam prop axial load capacity  Prop axial load capacity is entered for beam props. |
Slab prop axial load capacity  Axial load capacity is entered for slab props. |
Number of consecutive props, n  The number of consecutive prop is entered. |
Concrete casting speed  The value in m/hour is entered for the concrete casting speed. |
Concrete casting temperature  A value in °C is entered for the concrete casting temperature. |
Whole project  Formwork scaffolding report is generated for the whole project. |
Active story  Formwork scaffolding report is created for the active story. |
Selected objects  Formwork scaffolding report is generated for the selected objects. |