With the "Dynamic Input" feature, you can enter the length and angle information are entered instantly during the object identification stagestep. You can switch between the length-angle values by pressing the TAB key on the keyboard during the process.
...
Click the line command and click the drawing area to give the 1st point of the line.
Type 500 on the keyboard. The length value will be 500 cm. (If your working unit is meters, write 0.5)
Press the TAB key on the keyboard. The cursor will be in the Angle box. (If you press the TAB key continuously, the cursor will jump to the angle and length information boxes respectively.)
Write 60 as the angle value.
Click the left mouse button or press the Enter key, a line will be formed.
...
Next Topic
...