...
Specifications |
|---|
DIN 277 - Zone category  The option is marked for whatever purpose the zone will be used for. Options, respectively; HFN1 is residential and recreation, HFN2 office, HFN3 production and research, HFN4 storage and sales, HFN5 education and culture, HFN6 medical treatment, NNF other, VF traffic, FF function. |
DIN 277 - Zone type  One of the options a-top and all sides are closed, b-top is closed, open side exists, c-top is open options are marked or automatic selection is marked and the program ideCAD is automatically found. |
II BV - area calculation  The area account factor containing II BV metrics is entered. |
DIN 277 reports  When the option is selected, the zone is not taken into consideration in DIN 277 reports. |
II BV reports  When the option is selected, the zone is not taken into consideration in the II BV reports. |
Volume calculations  When the option is selected, the zone volume is not taken into consideration in DIN 277 and II BV reports. |
Built-up area ratio reports  When the option is selected, the zone is not taken into build-up area ratio reports |
Floor area ratio reports  When the option is selected, the zone is not taken into floor area ratio reports. |
...
Zone | ||
Measure | Listed | Explanation |
Constant | Independent | The fixed measure used will be used exactly as the amount. |
Length | Independent | It means that the length measure found while defining the material will be used exactly as the length value. |
Perimeter | It means that the length of the material will be found by multiplying the length measurement found when defining the material and the perimeter of the zone. | |
Area | Independent | It means that the area measure found while defining the material will be used exactly as the amount. |
Top area | It means that the value to be found by multiplying the area measure found when defining the material with the area of the surface above the site will be used as the material area. | |
Bottom domain | The value to be found by multiplying the area of the area found when defining the material with the area of the surface under the location means to be used as the material area. | |
Top and bottom area | When defining the material, the value found by multiplying the sum of the area size found at the top and bottom of the space and the surface areas at the top and bottom of the space means to be used as the material area. | |
Volume | Independent | It means that the volume measurement found when defining the material will be used exactly as the volume value. |
Volume | It means that the volume measurement found when defining the material will be used by multiplying the space volume. | |
Count | Independent | The number measure found while defining the material will be used exactly as the material number. |
Count | The number measure found while defining the material will be used exactly as the material number. | |
...
Next Topic