With the Trapezoid Type 1 command, you can quickly draw the trapezoid truss type, which is one of the prepared truss types, and adjust your truss heights from its the trapezoid truss type, is drawn quickly. Truss heights are adjusted from the truss settings.
Trapezoid Type 1 Truss Schematic Drawing:
...
Usage step |
|---|
Entering 80 cm for h1 and h2 and 120 cm for h4 in the height tab of the truss settings  |
Creating the first point of the truss  |
Determination of the second point of the truss and the formation of the truss   |
...
Next Topic