Page Comparison

End plate

Image Modified

 End plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Common

Image Modified

The distances in both plates are adjusted at once.

Shim

Image Modified

Shim is a plate placed between the elements to be connected in bolted connections. If shim is to be made, the option is selected and t2, thickness value is given.

Connection plate

Image Modified

Connection plate is determined by entering values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Stiffener plates

Image Modified

The stiffener plates are determined by entering the values. The values ​​to be entered are shown in the schematic drawing.

Schematic drawing

Image Modified

Connection and plate values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Chamfer (c1)

Image Modified

For easy assembly of the plates in the field, the use of slope, slope type and geometric properties are determined by entering the value.

Schematic drawing

Image Modified

Connection, notching and cutting values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Horizontal arrangement

Image Modified

The horizontal arrangement distance value of the bolts is entered. The values ​​to be entered are shown in the schematic drawing.

Group 1

Image Modified

Distance values ​​of bolts to beam and other bolts are entered. The values ​​to be entered are shown in the schematic drawing.

Bolt properties

Image Modified

The Hole and Bolt Parameters dialog is opened by clicking on the bolt properties button. The bolt properties are set in this dialog.

Schematic drawing

Image Modified

Connection and bolt arrangement values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.

Welds

Image Modified

The thickness, type and angle values ​​of the welds to be made at the connections are given. The information on whether it will be done on the construction site or not is entered.

Weld electrode

Image Modified

The strengths of the welding electrodes are defined in the design inputs. The strength of the main element in the weld connection is controlled under the condition that it has less strength than the weld strength.

To create the welding electrode, provide the information "Name" and "Weld metal tensile strength" in the dialog that opens after clicking "Create New".

Expand
title Moreover
Welding geometry is determined automatically by the program. These properties can be changed to easily determine the connection properties. Geometry features are in accordance with industry standards and in the form specified in AISC. Image Modified

Schematic drawing

Image Modified

Connection and weld values ​​are shown on the schematic drawing.

Preview

Image Modified

There is a preview of the connection. The selection made and the entered values ​​can be followed simultaneously in the preview.