...
Specifications |
Time history case name  The case name is entered. |
Starting time  The starting time is entered. |
End time  The end time is entered. |
Time increment for steps  The value for the time increment is entered at each step. |
Step period of output  Step period is entered for outputs. |
Mass coefficient  Mass coefficient is entered. |
Stiffness coefficient  Stiffness coefficient is entered. |
Gamma  Gamma value is entered. |
Beta  Beta value is entered. |
Input functions  From the loading column, determine which loading or loadings you will do the analysis for and enter a factor. You can add uploads one after the other with add new row. |
Scale  It is a scaling method used to approximate the acceleration record defined in the time history function to the elastic design spectrum curve. In this method, only a single acceleration record is scaled by zooming into the spectrum curve. For three-dimensional calculation, you can use the Scale Ground Motion command under Analysis list from the Ribbon menu.  |
...
Next Topic