...
Specifications |
|---|
Check project consistency before report generation  If it is desired to list the conformity conditions in terms of regulations while receiving the report, it is marked. If the option is not selected, the program will not notify the project designer at the beginning of the report. |
Object naming  How element naming will be selected. The option selected in this section and the story index entered in the story parameters are used together. For example, let the story index entered in story parameters be 1. Let K101 option be ticked as naming. S1 name will be considered as S101. If no index was entered in the story general parameters, it would be S01. If the K1001 option is selected in the naming, the name S1 will be considered as S1001. If the index was not entered in the general parameters of the story, this naming would be S001. |
Structural material naming  How the naming of the reinforcement material to be seen in the reports is selected. |
Slab analysis and concrete design  When marked, the program automatically performs the analysis and reinforcement of the beamless slabs and toothed floors in the system during the analysis. However, it is not compulsory to perform slab analysis and reinforced concrete for frame design. If the shortness of the analysis time is important, you can do the slab analysis later with the slab analysis button. |
Foundation analysis and concrete design  When marked, the program also analyzes all foundations in the system during analysis. Fundamental analysis is not required for framework design unless you are doing building foundation interactive analysis. If the shortness of the analysis time is important, you can also do the fundamental analysis with the fundamental analysis button at the end. |
Environmental exposure class  Environmental exposure class is selected from the list according to TS EN 206, schedule 1. Information arranged according to the selected class is indicated on the letterheads given in the drawing details. |
...
Next Topic