Analysis, Beam reinforcement design and code requirements check results of results and insufficiency conditions for beams are displayed in the Beam Reinforcements dialog. In the beam reinforcement dialog, beam transverse and longitudinal reinforcements (span and support reinforcements), internal forces calculated as a result of the analysis, increased internal forces related to TBDY, capacity ratios, deflection and crack control results are given. Beam reinforcements are changed and fixed in the Beam Reinforcements dialog.
Location of Beam Reinforcements
...
Dialog
After analysis, you can access it by clicking on the Beam Reinforcements command under the Concrete Design title of the ribbon menu Analysis and Design tab .
...
Specifications |
|---|
3D image  |
Show columns  If the option is selected, column rebars are shown on the screen. |
Show beams  If the option is selected, beam rebars are shown on the screen. |
Show shearwalls  If the option is selected, shearwall rebar is shown on the screen. |
Show longitudinal bars  Longitudinal bars of the elements with option marked are shown on the screen. |
Show lateral bars  The transverse reinforcements of the elements with options are displayed on the screen. |
Show individual colors   If the option is selected, bars with different diameters are shown in different colors. Which color represents which diameter is on the right of the screen. If the option is off, all of the rebars are shown in red. |
...
Next Topic
Related Topics