...
Specifications |
|---|
Show units  If marked, the units belonging to the loads will be shown on the structure. |
Manual scale factor  If the option is not selected, the scale factor deemed appropriate by the program is applied for load diagrams. If checked, the desired scale factor value can be entered manually in the box on the left. |
Load type  The issue that needs to be taken into consideration when examining the load types is that after selecting the relevant load type from the list, it is necessary to select the correct load condition under the Combination title. Otherwise, the loads to be analyzed will not be displayed in the image window. |
Filter  If the "Node loads, Frame element loads, Shell loads" lines in the list are checked, the loads for all elements are shown on the structure. Unchecking the loads you want not to show is enough to filter them from the screen. The desired option can be selected by selecting one of the "Moments, Forces, Both" options in the list. |
Combination  The load cases including the selected load type are listed. The loads can be examined through the structure by selecting the appropriate load status from the list. |
...
Next Topic