...
Specifications |
Column primary section The primary support beam section of the column formwork is selected from the list. |
Column secondary section The secondary support beam section of the column formwork is selected from the list. |
Slab primary section The primary support beam section of the slab formwork is selected from the list. |
Slab secondary section The secondary support beam section of the slab formwork is selected from the list. |
Beam primary section The primary support beam section of the beam formwork is selected from the list. |
Beam secondary section The secondary support beam section of the beam formwork is selected from the list. |
Beam upper primary section The primary upper support beam section of the beam formwork is selected from the list. |
Beam upper secondary section The secondary upper support beam section of the beam formwork is selected from the list. |
Plywood thickness Plywood plate thickness value is entered. |
Rod diameter The diameter value of the fitting (rod) is entered. |
Wind load C Wind load coefficient value is entered. |
Wind load Q Wind pressure value is entered. |
Support H A value is entered for the support settlement height. |
Support V A value is entered for the support settlement width. |
Support interval Value is entered for the support interval. |
Strut axial load capacity Support axial load capacity value is entered. |
Modulus of elasticity Modulus of elasticity value is entered separately for timber and plywood material. |
Bending strength The bending strength value is entered separately for timber and plywood material. |
Shear strength Shear strength value is entered separately for timber and plywood material. |
Rod yield stress Yield strength value is entered for rods. |
Beam prop axial load capacity Prop axial load capacity is entered for beam props. |
Slab prop axial load capacity Axial load capacity is entered for slab props. |
Number of consecutive props, n The number of consecutive prop is entered. |
Concrete casting speed The value in m/hour is entered for the concrete casting speed. |
Concrete casting temperature A value in °C is entered for the concrete casting temperature. |
Whole project Formwork scaffolding report is generated for the whole project. |
Active story Formwork scaffolding report is created for the active story. |
Selected objects Formwork scaffolding report is generated for the selected objects. |
...
Next Topic