...
You can also access the Concrete Design tab by clicking the Analysis Model command under the ribbon menu, Concrete tab, Structural Inspection heading .
...
Design Input Types
...
Design input types and examples |
|---|
Element materials  The materials defined for the elements are displayed on the elements in the display window. Elements with different materials are painted in different colors. From the color scale on the left of the screen, it can be seen which color represents which material.  |
Element sections  The sections used to the elements are displayed on the elements in the view window. Elements with different cross sections are painted in different colors. From the color scale on the left of the screen, you can see which color represents which section.  |
Element lengths  The lengths of the rod elements are shown in the display window. Elements with different lengths are painted in different colors. From the color scale on the left of the screen, you can see which color represents which length value.  |
Stiffness reductions  In the stiffness reduction tab in the element settings, the elements whose stiffness has been changed by the user are colored red in the display window.  |
Overridden elements  Stiffness reduction was made by the user, overridden section parameter was used, defined temperature parameter, etc. If there are elements whose element options have been modified, they are colored red in the view window.  |
Slab thicknesses
Slabs of different thicknesses Shearwall groups  It shows the shearwalls defined as shearwall group.  |
Shearwall thickness  Shearwalls of different thickness appear in different colors in the view window. From the scale on the left of the screen, it can be seen which color corresponds to which thickness value.  |
Shearwall types  Different types of shearwalls are painted in different colors in the view window. From the color scale on the left of the screen, you can see which color represents which |
type. |
Slab |
thicknesses |
Slabs of different thicknesses are painted in different colors in the view window. From the color scale on the left of the screen, |
you can |
see which color represents which |
Shearwall groups
It shows the shearwalls defined as shearwall group.
thickness. |
|
Slab |
coating loads |
The slabs with different |
coating loads are painted in different colors in the view window. From the color scale on the left of the screen, it can be seen which color represents which load. |
|
Slab total dead loads |
 Lining loads and self weights of slabs are based on summation. Elements with different values are shown in different colors. From the scale on the left of the screen, it can be seen which color corresponds to which load value. |
 |
Slab live loads The slabs with different live loads are painted in different colors in the view window. From the color scale on the left of the screen, it can be seen which color represents which load. |
Wall loads  The wall loads defined for the beams are displayed on the beams in the view window. Beams with different wall loads are painted in a different color. From the scale on the left of the screen, it can be seen which color corresponds to which load value.  |
Beam live loads  Live loads defined to the beams are displayed on the beams in the view window. Beams with different live loads are painted in a different color. From the scale on the left of the screen, it can be seen which color corresponds to which load value.  |
T - Beam width  Beams with different plate widths appear in a different color in the view window. From the scale on the left of the screen, it can be seen which color corresponds to which length value.  |
Shearwall thickness
Shearwalls of different thickness appear in different colors in the view window. From the scale on the left of the screen, it can be seen which color corresponds to which thickness value.
Modulus of subgrade reaction |
 The bed coefficient value used is shown on raft plates. From the scale on the left of the screen, it can be seen which color corresponds to which bedding coefficient value. |
 |
Concrete Design Tab
...
Specifications |
|---|
Design input  By selecting any of the options in the list, it is possible to display the input determined by the user on the building model in the view window. |
Design output  By selecting any of the options in the list, it is possible to display the input determined by the user on the building model in the view window. You can find detailed information on the title ofconcrete design outputs. |
Show values  If checked, the values of the diagrams will be shown on the structure. |
Extrude elements  If checked, the frame system is shown as solid (solid). If not checked, it is shown as a line (bar). |
...
Next Topic
...