Page Comparison

You can edit the profiles for the top, bottom cap and posts of the scissors in the Section tab of the Scissors Settings dialog.

...

With the Truss Settings, the profile is selected for the header, footer, vertical and diagonal of the truss.

Location of Profile Settings

You can access the Truss Settings dialog by clicking the Settings icon from the Trusses toolbar that opens when the Truss command is clicked. Truss pattern type and count settings are available on the Section tab.

...

Usage Steps

• Click the Truss icon in the ribbon menu .

...

• The scissorstrusses toolbar will open. Here Settings , click the icon.

...

• The Scissors Truss Settings dialog will be displayed. Here click the Section Click the tab.

...

• You can choose the sections of your scissors truss for the upper and lower head, strut and crossheader, footer, vertical and diagonal. Select the section you want to use from the Sections List.

...

• Click the button of the element to which you want to assign the section you selected in the Assign sectionto. For example, when you click the top title header button, the section you select will be assigned to that heading.

...

• If you want, you can click All to assign sections to all the elements of your scissors yourtruss at once. You can see the preview of the section on the right side of the element you have assigned.

• You can change the direction of the section you have selected by selecting one of the 0 °, 90 °, 180 ° and 270 ° options from the rotation section.

...

• You can choose from top, center of gravity and bottom options for the placement of the scissors truss elements. You can give offset delta X and Y values ​​by selecting the Defined option.

...

...

Specifications

...

Explained

Usage step
Selecting the section from the section list Image Added
Clicking in the assignment section of the element (footer) to which the section will be assigned Image Added
Changing the direction of the section from the rotation section Image Added
Determination of the truss center of gravity Image Added

Sections Tab

...

Specifications
Sections Image Modified All sections with the project added are listed. The

desired cross

wanted truss section is selected from the list and assigned to the truss elements. A section not included in the list is added to the list by using the load section button.

Section settings

Image Removed

Image Added The truss elements of the section selected from the list from the

ancestor

profile section are assigned from this section. The selected section can be assigned to all

scissor

truss elements by clicking the All button, and only the section can be assigned to that element by clicking one of the

Upper Heading

header,

Lower Heading

footer,

Post

vertical and

Cross

diagonal buttons. With the rotation you can change the section direction. It has 0 °, 90 °, 180 ° and 270 ° options. In the assigned section, the relevant truss element is called the section. The shape of the assigned section appears as a preview on the right.

Section loading

Image Removed

Image Added The Load Section button is used to add new sections to the sections in the section list . With the Load Combined L Section and Load Combined C Section buttons, the

desired

wanted L and C profiles are selected and combined sections are created and added to the list.

Image Removed 

Material Image Added The material for the truss is selected.

Image Added Image Modified In case of using non-symmetrical profiles, this option is marked if the strut at the start and end of the scissors is desired to have different directions. Image Modified

...