The edges of the quarters zones are surrounded by walls. However, in some cases (balconies, stair landings, etc.), some edges of the spaces zones are not covered with these elements, they are empty. However, in order to define a sitezone, the boundaries of the site zone must be defined in some way. In his program he has developed site edges for this work. Neighborhood edges are objects that are used to define the site boundary.
To draw an edge:
...
Zone Edge command has been developed for this job in ideCAD. The zone border is determined with the zone edge command.
Location of Zone Edge Command
You can access it under the Ribbon menu Home tab, Zone title
...
Usage Steps
Click on the Zone Edge icon in the ribbon menu .
Click on the drawing area with the left mouse button and draw as many site edges as you wantto create the first point for the site edge.
When you click the second point with the left mouse button, your zone edge will be created.
Finish drawing the site zone edge by pressing the Esc key on the keyboard.
The edge of the site zone can be defined as connecting the two columns between the columns, or it can be attached to the wall-to-wall or wall-to-column. The edge of the site zone may be very open, broken. There is no limit to the number of vertices. The room zone edges can be connected to the columns at every point of the column.
When a site zone edge is deleted, the spaces zones connected to this site zone edge are also deleted.
Usage step |
|---|
Creating the first point of the zone edge by clicking on the wall corner  |
Creating the second point of the zone edge by clicking on the opposite wall corner  |
The formation of the edge of the zone  |
...
Next Topic